The HT216M LCD intelligent temperature transmitter is used for the input of resistance temperature detector (RTD) signal and thermocouple (TC) signal and for two-wire analog signal output (4−20mA).
The HT216M LCD intelligent temperature transmitter is used for the input of resistance temperature detector (RTD) signal and thermocouple (TC) signal and for two-wire analog signal output (4−20mA).
Application
To receive RTD or TC input signal, output 4~20mA, voltage, RS485 or HART signal
Application
To receive RTD or TC input signal, output 4~20mA, voltage, RS485 or HART signal
Features:
Supports 2 types of RTD, 10 types of thermocouple
Input signals are fully switchable
4~20mA output
Thermocouple cold end compensation
Response time ≤700mS
Features:
Supports 2 types of RTD, 10 types of thermocouple
Input signals are fully switchable
4~20mA output
Thermocouple cold end compensation
Response time ≤700mS
Technical Parameters
Input Signal
RTD and TC
Scope of Cold Junction Compensation Temperature
-20−70℃
Compensation Accuracy
±1℃
Output Signal
4−20mA (The input and output are not isolated.)
Load Resistance
RL ≤ (Ue- 12)/0.021
Output Current for Upper/Lower Limit Overflow Alarm
IH=21mA and IL=3.8mA
Output Current for Input Break Alarm
21mA
Power Supply Voltage
DC12−40V
Thermal Drift
0.01%FS/℃
Response Time
700ms, reaches to 90% of the final value.
Environment Temperature
-20−70℃
EMC
Comply with the industry equipment application requirements in GB/T18268 (IEC 61326- 1).
Technical Parameters
Input Signal
RTD and TC
Scope of Cold Junction Compensation Temperature
-20−70℃
Compensation Accuracy
±1℃
Output Signal
4−20mA (The input and output are not isolated.)
Load Resistance
RL ≤ (Ue- 12)/0.021
Output Current for Upper/Lower Limit Overflow Alarm
IH=21mA and IL=3.8mA
Output Current for Input Break Alarm
21mA
Power Supply Voltage
DC12−40V
Thermal Drift
0.01%FS/℃
Response Time
700ms, reaches to 90% of the final value.
Environment Temperature
-20−70℃
EMC
Comply with the industry equipment application requirements in GB/T18268 (IEC 61326- 1).
Product Introduction
Application
Features
Technical Parameters
The HT216M LCD intelligent temperature transmitter is used for the input of resistance temperature detector (RTD) signal and thermocouple (TC) signal and for two-wire analog signal output (4−20mA).
Application
To receive RTD or TC input signal, output 4~20mA, voltage, RS485 or HART signal
Features:
Supports 2 types of RTD, 10 types of thermocouple
Input signals are fully switchable
4~20mA output
Thermocouple cold end compensation
Response time ≤700mS
Technical Parameters
Input Signal
RTD and TC
Scope of Cold Junction Compensation Temperature
-20−70℃
Compensation Accuracy
±1℃
Output Signal
4−20mA (The input and output are not isolated.)
Load Resistance
RL ≤ (Ue- 12)/0.021
Output Current for Upper/Lower Limit Overflow Alarm
IH=21mA and IL=3.8mA
Output Current for Input Break Alarm
21mA
Power Supply Voltage
DC12−40V
Thermal Drift
0.01%FS/℃
Response Time
700ms, reaches to 90% of the final value.
Environment Temperature
-20−70℃
EMC
Comply with the industry equipment application requirements in GB/T18268 (IEC 61326- 1).
English
简体中文